ArmorAll AA12V2 0901 Manual Del Usuario página 11

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, UNPLUG BEFORE
TROUBLESHOOTING.
PROBLEM
The vacuum will not
operate.
Dust is being released
through the vents.
Reduced efficiency and
motor/speed vibration.
TROUBLESHOOTING
POSSIBLE CAUSE
No power supply.
Faulty power cord.
The filter is missing or damaged.
There are blockages in the
nozzle, or the vacuum inlets.
The filter is clogged by fine dust.
Dust cup full.
Check power supply - vehicle
battery, 12V power socket, cord,
breakers, and fuses.
Unplug and check the power cord.
If damaged, have it repaired by a
professional.
Attach or replace the filter.
Unplug and check nozzle, and inlets
for blockages.
Take off the filter and clean it or install
a new filter.
Empty the dust cup and clean the
filter.
11
SOLUTION