VenenWalker Pro 2 Manual De Instrucciones página 29

Explanation of the symbols
Danger symbols: These sym­
bols indicate hazards. Read
through the associated safety
instructions carefully and
follow them.
Supplementary information
Read operating instructions
before use! This symbol ap­
pears in blue on the device.
Protection class II
Symbol for devices classified
as "Type BF" (level of protec­
tion against electric shock)
Manufacturer
Serial number (Date of
production / consecutive
number)
Circuit symbol for alternating
current
Devices bearing this symbol
were put into circulation after
13.08.2005 (DIN EN 50419).
Devices labelled in this way
meet the labelling require­
ments of the EU member
states.
International recycling symbol
40°C max.
Temperature range
5°C min.
75% max.
Humidity range
30% min.
106KPa max.
Air pressure range
70KPa min.
Keep dry
KEEP DRY
Fragile
EU Representative
Importer
Medical device
0123
WITH THE CE MARK, THE MAN­
UFACTURER CONFIRMS THAT
THE PRODUCT MEETS THE
REQUIREMENTS OF THE AP­
PLICABLE EC DIRECTIVE AND
COMPLIES WITH THE "GENERAL
REQUIREMENTS" STIPULATED
THEREIN. The number 0123 alludes
to the notified body (certifier). To­
gether these certify that the German
Medical Devices Act (MPG) has been
observed by the distributor.
Signal words
Signal words indicate hazards if the
associated notices are not followed.
DANGER – high risk, results in seri­
ous injury or death
WARNING – medium risk, may result
in serious injury or death
NOTICE – may result in risk of dam­
age to material
29