Sagem PHOTO EASY 160 Manual Del Usuario página 34

Liasse AZUR_GB.book Page 30 Jeudi, 21. avril 2005 4:09 16
Connect your printer
Make sure that both the PC and the printer are switched on. Never apply force
when plugging in connectors into the equipment as this could damage both the
cable and the connector.
Connect your photo printer (USB port (B)) to PC using an USB cable.
Recognition between the two devices is automatic.
Using your printer
Your printer can operate in two different modes:
• 'Print' mode, selected by default
• 'Memory Card Reader' mode, see chapter 10.
In the latter mode, printing and infra-red or Bluetooth transfers are not
possible.
To quit this mode, refer to chapter 10
B
- 30 -