Sagem PHOTO EASY 160 Manual Del Usuario página 35

Liasse AZUR_GB.book Page 31 Jeudi, 21. avril 2005 4:09 16
10 P
ROCESSING THE CONTENT OF THE MEMORY CARD
FROM YOUR
From your PC you can access the card readers of your printer and process /
manage the image files.
Connect the printer to your PC via a USB cable.
Insert the memory card in your printer. The card comes up as another
disk drive in Windows Explorer.
You can access this drive to add, copy, move, save or delete images.
You can process photos directly on the memory card using the image retouch
software supplied with the printer.
Disconnect the device link then remove the memory card from its slot.
Your printer can operate in two different modes:
• Print' mode, selected by default
• Memory Card Reader' mode
To switch to 'Memory Card Reader' mode, hold down the
following screen is displayed.
To avoid corrupting the data on you memory card, make sure first of all, that
you have disconnected your peripheral device correctly under Windows,
before removing the memory card, disconnecting the USB cable, or quitting
the 'Memory Card Reader' mode.
Remark : In this mode, printing and infra-red or Bluetooth transfers are not possible.
PC
- 31 -
key until the