Sauder Beginnings Serie Manual Del Usuario página 16

Step 12
Carefully stand your unit upright.
å
Insert eight METAL PINS (1R) into the hole locations of your choice in the ENDS (A and B) and UPRIGHTS (C and D). Now,
å
set the SMALL ADJUSTABLE SHELVES (J) onto the METAL PINS so the SHELF SNAPS are resting on the METAL PINS.
Push on the SHELVES until each METAL PIN "snaps" into the SHELF SNAPS.
NOTE: If you wish to change the location of the SMALL ADJUSTABLE SHELVES, tap the SHELVES up with the palm of
å
your hand.
To insert the drawer into your unit, tip the front of the drawer down and drop the rollers on the drawer behind the rollers on
å
the unit. Lift the front of the drawer up and slide it into the unit.
To make adjustments to the drawers, loosen the SCREWS in the DRAWER FRONT BRACKETS, make needed
å
adjustments, and tighten the SCREWS.
1R
(12 used)
Page 16
J
B
D
2R
(4 used)
I
C
413037
J
A
www.sauder.com/services