Sauder Beginnings Serie Manual Del Usuario página 17

Step 13
Center a SCREW COVER (20P) over the head of each visible SCREW and press fi rmly.
å
Push a CAM COVER (12P) onto each visible HIDDEN CAM.
å
Apply the WARNING LABEL (2L) to the TOP (E). You should be able to read the label when the TV is removed from the
å
unit. When the TV is in place, it should hide the label. Peel off the backing and apply the label as shown in the diagram.
NOTE: This is a permanent label intended to last for the life of the product. Once applied, do not try to remove it.
å
To help prevent the TV from sliding, place the ANTI-SKID PAD (3M) under the front support of the TV or divide among the
å
front supports if more than one.
NOTE: Please read the back pages of the instruction booklet for important safety information.
å
This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry.
å
And to celebrate, why not share your success story?
5 lbs.
25 lbs.
www.sauder.com/services
2L
70 lbs.
E
3M
25 lbs.
30 lbs.
15 lbs.
Never use this furniture with a TV that is
too large or too heavy. Severe injury or
death can occur. The TV and furniture
will be unstable and may tip.
- The TV must weigh less than 70 lbs.
- The base of the TV must be able to sit
completely on this shelf.
5 lbs.
25 lbs.
413037
WARNING
12P
(8 used)
To cover HIDDEN CAMS
20P
(4 used)
To cover screws
Page 17