6.4. Charging external devices via USB cable
You can charge your mobile device via a USB charging cable connected to the light
alarm's USB port.
Connect the USB port of the mobile device via a suitable charging cable to the
USB port DC 5V USB CHARGING on the light alarm clock.
The USB connection will now be recognised by your mobile device and charging
will begin.
6.5. Setting the light
Press the
button to switch on the light.
Press the
button again to switch off the light.
Press the
button (lighter) or
6.6. Mood light
Press the
button to switch on the mood light.
Press the
button again to switch off the mood light.
NOTICE
The mood light turns on automatically when the wake-
up alarm goes off.
7. Setting the device
The radio must be switched off to carry out the different settings.
NOTICE
If no button is activated in the settings menu with-
in 10 seconds, the menu is automatically terminated.
Settings made up to this point are saved. You must go
through the whole menu again to make any further
changes.
7.1. Setting the date and time
Set the date and time.
Press and hold down the
The display to be changed starts to flash.
Press the
or
38 of 70
button (darker) to set the brightness.
button for approx. 2 seconds.
button to set the year.