Acuity Brands AFFINITY LITHONIA LIGHTING AFF OELR LED Manual Del Usuario

AFF OELR LED Remote Light
Installation and wiring.................................................................................................. Page 2-3
Maintenance ..............................................................................................................Page 4-5
Wiring diagram............................................................................................................Page 5
!
WARNING:
FAILURE TO FOLLOW THESE INSTRUCTIONS AND WARNINGS MAY RESULT IN DEATH, SERIOUS INJURY OR
SIGNIFICANT PROPERTY DAMAGE
maintaining this equipment. These instructions do not attempt to cover all installation and maintenance situations. If you do not understand
!
these instructions or additional information is required, contact Lithonia Lighting or your local Lithonia Lighting distributor.
WARNING: RISK OF ELECTRIC SHOCK – NEVER CONNECT TO, DISCONNECT FROM OR SERVICE WHILE EQUIPMENT IS
!
ENERGIZED
.
WARNING:
DO NOT USE ABRASIVE MATERIALS OR SOLVENTS. USE OF THESE SUBSTANCES MAY DAMAGE FIXTURE,
WHICH MAY RESULT IN PERSONAL INJURY.
!
WARNING
Do not exceed fixtures ambient temperature -40°F-122°F (-40°C-50°C). Use of unauthorized input voltage voids
:
!
warranty and UL listing of this product and may present a risk of fire or explosion
WARNING: Do not exceed fixtures ambient temperature -40°F-122°F (-40°C-50°C). Use of unauthorized input voltage
voids warranty and UL listing of this product and may present a risk of fire or explosion.
•
All servicing should be performed by qualified personnel.
•
Consult your local building code for approved wiring and installation.
•
For use Outdoors. Failure to ensure conduit connections are properly protected against water ingress during installation may void warranty.
•
Do not mount near gas or electric heater.
•
Equipment should be mounted in locations and at heights where it will not readily be subjected to tampering by unauthorized personnel.
•
The use of accessory equipment not recommended by the manufacturer may cause an unsafe condition.
•
Do not use this equipment for other than intended use.
AND DELIVER TO OWNER AFTER INSTALLATION
IMPORTANT SAFEGUARDS
When using electrical equipment, basic safety precautions
should always be followed, including the following:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
- For your protection, read and follow these warnings and instructions carefully before installing or
SAVE THESE INSTRUCTIONS
AFFINITY
.
®