BaByliss G940E Manual página 54

Idiomas disponibles

It is imperative not to look directly at the area treated during the ﬂ ash and to

wear protective eye glasses when using the Homelight epilator to treat the face.

It is imperative not to look directly at the area treated during the ﬂ ash and to

wear protective eye glasses when using the Homelight epilator to treat the face.

The special face ﬁ lter is appropriate for treating your cheeks, upper lip and chin.

Do not use for epilation of eye lashes, head hair, and eyebrows.

This product is not appropriate for full removal of male beard.

For your comfort and safety, we recommend you have someone help you for the

ﬁ rst few sessions using the Homelight on your face.

To epilate the face, it is imperative that you use the special face ﬁ lter (only

available on selected models). Its smaller surface with a ﬁ lter to reduce the light

intensity is intended to treat the face gently. Do not use Homelight on the face

WITHOUT the special face ﬁ lter.

The PRECISION mode is required when removing facial hair.

DO NOT USE THE GLISS MODE TO TREAT THE FACE OR SENSITIVE AREAS.

Your facial skin should be shaven, clean and dry with no remnants of a cream or lotion.

Please do not try to remove hair (whether with, for example, an electric epilator or with wax) before

using the Homelight epilator. Epilation (removing hair by its roots) renders pulsed light treatment

ineﬀ ective.

1. Place the special face ﬁ lter on the application surface located on the head of your Homelight depilator

before connecting it to the mains and switching it on. To put it in place, carefully take hold of the ends

of the face ﬁ lter with your thumb and index ﬁ nger and gently but ﬁ rmly press it onto the head of the

appliance. Ensure that the ﬁ lter is correctly positioned.

2. Plug in the unit and press the ON button to switch it on.

3. In about 1.6 second (at level 1) the 'Ready' indicator light will come on. The appliance is now ready to

release the ﬁ rst pulse. The appliance is set to the lowest power setting by default. The power indicator

light for level 1 is lit. To treat the face, it is strongly recommended that you adjust the appliance to the

lowest light intensity: level 1.