Publicidad
11. Put the hinge cover and the screw cover back.
12. With the doors closed, check that the doors are aligned
horizontally and vertically and that the seal is closed on all sides
before finally tightening the bottom hinge. Re-adjust the levelling
feet as needed
INSTALLATION
Install door handle
Rear spacer
Screw the rear spacers at the rear of the unit.
Space Requirement
Keep enough space of door open.
Keep at least 50mm gap at two sides.
Leveling the unit
To do this adjust the two leveling feet at front of the unit.
If the unit is not level, the doors and magnetic seal align-
ments will not be covered properly.
Publicidad
