Publicidad
Door Reversal
Tool Required: Philips's screwdriver, flat bladed screwdriver, Hexagonal spanner.
•
Ensure the unit is unplugged and empty
•
To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid so that it will not
slip during the door reversing process
•
All parts removed must be saved to do the reinstallation of the door.
•
Do not lay the unit flat as this may damage the cooling system
•
It's better that 2 people handle the unit during assembly
1.
Remove the top right hinge cover{
2. Undo the screws. Then remove the hinge bracket.
3. Remove the top left screw cover.
4. Move the core cover from left side to right side. And then lift
the upper door and place it on a padded surface to prevent it
from scratching.
5. Unscrew and remove the bottom hinge pin, turn the
bracket over and replace it.
6. Refit the bracket fitting the bottom hinge pin. Replace
both adjustable feet.
7. Detach the Fridge and the Freezer door gaskets and then
attach them after rotating.
8. Place the upper door back on. Ensure the door is aligned
horizontally and vertically so that the seals are closed on all
sides before finally tightening the top hinge.
9.
Insert the hinge bracket and screw it to the top of the
unit
Publicidad
