Start-up
The alarm clock is powered by two 1.5 V R6/LR6 (AA)
batteries.
1. Remove the battery compartment cover
upwards.
2. Insert the batteries as shown on the bottom
of the battery compartment. Pay attention
to the correct polarity (+/-).
3. Replace the battery compartment cover and
press it down. The cover must audibly engage.
As soon as the batteries are inserted, the alarm
clock switches to reception, see next chapter.
Notes on changing the battery:
Only use the battery type specified in the
"Technical Data".
Always replace all batteries.
Dispose of old batteries in an environmentally
friendly manner, see "Disposal".
52