Spengler AUTOTENSIO SPG440 Manual página 32

Memory Check
With power off, you may check past test results by using the " M" buttons.
Upon activating test results, you can press the "M "buttons to scroll through all test results stored in
memory. The LCD will display the last measurement memory as NO:1 reading.
Note: Past test results will only be displayed from the most recently used memory group. To check past
test results in other memory groups, you must first select the desired group and then turn monitor
off. (See "Select Memory Group" on Page 28.)
Memory Deletion
Which in memory check made. Press "
the LCD screen display "
Note: Memory cannot be recovered once it has been deleted.
Last 3 Tests Average
With power off, press the " M " button to activate screen display. After the unit performs a self diagnosis, the
screen will display the average test results from the last 3 readings of the last group used. The " AVG " symbol
will appear along with the corresponding WHO Blood Pressure Indicator.
To check the average results from other groups, select the desired group first prior to activating the " M "
button in the off position (See "Select Memory Group" on page 28).
" and hold on for about 3 seconds to delete all history results and
" with beep sounds. Then press " " button to turn off the unit.
32