Publicidad
Idiomas disponibles
Idiomas disponibles
• Blade replacement
1. To ensure safety, remove the battery.
2. Proceed step by step as shown below. Replace the blade.
3. After replacement, clean it, test it, close it and finish the replacement.
1. Remove the screws with a
screwdriver and open the cover
4. Disassemble the pin and
remove the movable blade
7. Replace the blade
* Mobile blade and counter blade can be replaced individually; when replacing, do not be afraid
of the blade opening too small; when the battery is inserted, the normal aperture size will
automatically reset.
Original instructions
EN
2. Remove the screws on the nut
pin (this step is critical)
5. Remove the fixed blade
8. Refit the nut
22
3. Unscrew the nut
6. When replacing the blades,
it is necessary to add lubri-
cating oil between the blades
9. Install the locking pin
Publicidad
