lmportant safety instructions
1. Read this instruction manual carefully before using the appliance for the first time. Observe all of the
safety safety instructions in order to avoid injuries that may be caused through improper use.
2. If the appliance is transferred to a third party,please pass on this instruction manual as well.
3. No liability can be accepted for any damages occurring as a result of improper use or incorrect
handling of this appliamce.
4. Before starting to use this electrical appliance, please check whether the mains voltage corresponds
with the details onthe type plate.
5. This appliance should not be used for commercial purposes.
6. Never allow electrial appliamces to be operated by unsupervised children,or anyone else who may
be unaware of the dangers of working with apparatus.
7. Place this appliance on an even and stable surface, away form gas flames and/or hobs and stoves
and out of the reach of children.
8. Never attempt to repair the appliance yourself. This could result in electric shock!
9. The appliance should only be repaired by a qualified electrician if any malfunctions are discovered.
Never open the housing for the appliance unde any circumstances.
10. Never submerse the appliance in water or any other liquid.
11. Avoid causing damage to the cable by not squashing it over sharp edges.
12. Never touch the plug if your hands are wet or damp.
13. If you have to use an extension cable, it must be suitable for use with the corresponding power
rating.
14. Lay out the mains cable and any additional extenson cables in such a way that they cannot be pulled
out accidentally and that they do not represent a tripping hazard.
15. Do not remove the plug from the socket by pulling on the cable and do not wind the cable around the
appliance. Inspect the mains plug and the cable regularly for any damage.
16. Do not insert any objects into the interior of the appliance's housing.
17. Ensure that you remove the plug after every use and before cleaning.
18. If the mains cable for this appliance is damaged, it must be the manufacturer or the customer service
department,or a similarly qualified person, to avoid any potential danger.
19. Danger of scalding: The warming plate and the housing become very hot during use. Only hold the
P-2