Publicidad
STEP 7
F
1. Attach drawer slide (F) to middle side panel (3) by inserting 3 screws (E) through holes on
drawer slide (F), then tighten to middle side panel (3).
2. Screw 4 cam bolts (A) into cam bolt holes on middle side panel (3).
STEP 8
1. Slide back panel (12) into grooves on shelf (6), bottom board (7) and divider panel (8).
2. Insert 4 wood dowels (C) into wood dowel holes on middle side panel (3).
3. Attach middle side panel (3) to shelf (6), bottom board (7) and back panel (12) by inserting cam
bolts (A) into cam bolt holes and inserting wood dowels (C) into wood dowel holes on shelf (6)
and bottom board (7). Make sure back panel (12) slides into groove on middle side panel (3).
4. Insert 4 cam locks (B) into cam lock holes on shelf (6) and bottom board (7), then rotate
clockwise to secure cam bolts in place.
3
E
F
E
F
9
6
8
7
B
B
E
B
C
C
C
B
12
C
A
A
3
A
3
A
Publicidad
