Publicidad
DESK
STEP 1
the step by step directions below
must be labeled in the drawing
1. Screw 2 cam bolts (A) into cam bolt holes on shelf (6).
2. Insert 2 wood dowels (C) into wood dowel holes on divider panel (8).
DIRECTIONS = 12 pt >>
3. Attach divider panel (8) to shelf (6) by inserting wood dowels (C) into wood dowel holes
S MUST STAY AS SHOWN>>
on shelf (6).
4. Insert 2 screws (D) through holes on shelf (6), then tighten to divider panel (8).
STEP 2
W THE GUIDES SHOWN>>
1. Insert 2 wood dowels (C) into wood dowel holes on shelf (6).
2. Attach divider panel (8) to shelf (6) by inserting cam bolts (A) into cam bolt holes and inserting
wood dowels (C) into wood dowel holes on divider panel (8).
3. Insert 2 cam locks (B) into cam lock holes on divider panel (8), then rotate clockwise to
secure cam bolts in place.
STEP X = 20pt >>
A
A
6
8
6
B
C
C
8
8
C
C
B
6
D
D
^^ Do not u
holes. Call t
holes, etc.
Publicidad
