Argus AA300 Manual Del Usuario página 12

Pn: 400-2000 Rev.03-1106
For more detailed operating instructions and user information, consult the full users
manual provide with each analyzer, or download one at www.argusanalyzers.com/support
Quick TesTing guide:
AA300, AA350, AA400, AA500p
safety
Inspect the battery for damage or leaks. Remove watches,
rings, metal bracelets. Clean terminals. Keep tools, cables and
clamps away from moving engine parts.
connect the Analyzer
1. If possible, charge battery before testing.
2. Always connect the analyzer directly to the battery posts.
3. Connect red clamp to "+" terminal, and black clamp to "-"
terminal. Rock clamps to maximize contact.
setup
1. Set the battery type: Use the browse button(s) to change
values. Use
2. Set rating standard: Use the browse button(s) to change
values. Use
3. Enter rated value from battery label (350, 400, 500P only): Use
the browse button(s) to change values. Use
Test the Battery
Follow prompts on screen to initiate tests. (300, 400, 500P only)
= enter/select
navigating
Use
n
Use the
n
within a test screen.
to select.
to select.
= start engine
to change test screens.
> <
or to display test results
EN
to select.