Descargar Imprimir esta página

Cramer RM800 Manual Del Operario página 14

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 58
Installation
EN
14
CRAMERTOOLS.COM
Version 1 - 2020.12.30
Connect the boundary wire to the charging station as follows:
1
Remove the protective cover on the charging station and thread
the wire behind the tabs into the channel at the rear of the
charging station.
2
Press the connector onto the metal pins on the charging station
(marked with left and right arrows).
NOTE: Make sure the boundary wire to the right of the charging station
is connected to the arrow pointing right and the same for the left side.

Publicidad

loading