DJI CHX162-30 Manual página 5

EN
DJI TM Mini 3 Pro Two-Way Charging Hub
1. Status LEDs: The status LEDs display battery levels for three seconds
after the batteries are inserted into the charging hub. The LEDs in an array
blink successively during charging and change to solid green after the
corresponding battery is fully charged.
2. Function Button: Press to check the battery power level. When both
the Intelligent Flight Battery and an external device are connected for
charging, the battery will be charged before the external device. Press and
hold the function button for two seconds to switch the charging priority.
Place the charging hub on a flat and stable surface when in use.
Make sure the device is properly insulated to prevent fire hazards.
DO NOT attempt to touch the metal terminals on the hub. Clean
the metal terminals with a clean, dry cloth if there is any noticeable
buildup.
Visit https://www.dji.com/mini-3-pro/downloads or https://www.dji.com/mini-3/
downloads to refer to the user manual for more information.
Specifications
Model Number
Supported Charger
Input (USB-C)
Output (USB)
Operating Temperature
DJI Mini 3 Propellers
Mount the marked propellers to the marked motors and the
unmarked propellers to the unmarked motors.
Use the screwdriver provided in the aircraft package to remove
and install the screws. Unsuitable screwdrivers may damage the
screws.
Use the new screws provided with the propellers when installing.
DO NOT reuse old screws.
Use two propellers from the same package. DO NOT mix with
propellers from other packages.
DJI Mini 3 Pro Intelligent Flight Battery
Specifications
Model Number
Capacity
Charging Temperature
4
CHX162-30
USB Power Delivery charger
5 V 3 A, 9 V
5 V 2 A
5° to 40° C (41° to 104° F)
(Figure B)
BWX162-2453-7.38
2453 mAh
5° to 40° C (41° to 104° F)
(Figure A)
3 A, 12 V 3 A