SOMFY R.S485 SETTING TOOL Instrucciones página 4

EN
2. INSTALLATION
Precaution
• These instructions are mandatory for the drive and home
automation professional installing this product.
• The Standard NF C 15-100 for electrical installations must be
adhered to.
• Comply with current standards and legislation in the country of
installation.
• Reserved for indoor use only.
• Before use, the condition of the product must be checked, never
use a faulty product.
• Disconnect from the mains before connecting or disconnecting
the drive.
• With this product, the neutral and phase cables may still be
powered if the mains plug is not disconnected.
• Do not use the product continuously with the motorised
product.
• Disconnect the product once setting is complete.
Caution
• This product must be connected to a single drive at a time.
• The remote control device must be placed out of the reach of
children.
• Never drop, jolt, pierce, submerge this product or any of its
accessories.
• Follow the instructions for the respective drive.
4 Copyright
©
2020 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
RS485 SETTING TOOL