Publicidad
Idiomas disponibles
Idiomas disponibles
RS485 SETTING TOOL
2.2. WIRING
Precaution
• Cables which pass through a metal wall must be protected and
isolated using a sheath or sleeve.
• Attach cables to prevent any contact with moving parts.
Connect the RS485 SETTING TOOL to the RS485 product.
Precaution
Between the RS485 SETTING TOOL and the RS485 product, the
cable length should not exceed 10 m.
2.3. COMMISSIONING
2.3.1. Switch on the RS485 SETTING TOOL
!
Point to point settings only (this
is not a network tool).
1) Press the on/off button
to switch on the RS485
SETTING TOOL.
2) Choose the «Somfy RS485
node discovery» fonction
or
the
parameters»
pressing the up and down
buttons.
!
Use the «Up», «Down», «Back»
and «Ok» buttons to naviguate
in the menu.
©
Copyright
2020 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
«setting
tool
fonction
by
SOMFY RS485
NODE DISCOVERY
SETTING TOOL
PARAMETERS
OK
EN
7
Publicidad
