Samsung SNC-M300 Instrucciones De Funcionamiento página 54

To setup the system time
1
Select one of the NTP server addresses
of the <Address> list, or click
<Syncronize with PC Viewer>.
2
Set the date and time directly if you
select <Manual>.
3
Click the [Apply] button.
The setting time is applied.
NTP Server IPs are provided by a public agency and their list is therefore subject to change.
In a local network, a separate NTP server must be manually defined.
The current time can vary depending on the computers regional (GMT and DST) and country
(PC time configuration) settings.
To view the log information
Click <SYSTEM>  <LOG>.
The Log window appears showing log
information.
<System Log List>: Shows the log information about the system changes along with time and IP
- <User Log In>: Shows current camera login user.
- <Video Configuration Change>: Shows video setting changes.
- <System Time Change>: Shows time changes.
- <System Start>: Shows time when the camera is turned on.
The maximum number of logs that can be recorded is 2,000.
If the number goes over 2,000, new logs are added and the bottom-most logs are deleted.
50_
Setting Up
address.