Jimmy BX7 Manual Del Usuario página 9

Trouble shooting
Please check the following trouble points before go to the maintenance department.
Trouble
Power Failure
Low suction power
UV light failure
Brushroll failure
Note:If fault remains after adopting the following solutions, contact after sale service or local distributor
immediately.
Possible Reasons
Power cord is not firmly
On/off switch is not pressed
down
Suction port clogged
Dust accumulation on filter
Dust accumulation on cyclone
The machine is placed upright
UV light damage
Sensor window is contaminate
Brushroll tangled with foreign
matter
Belt broken
Solutions
Insert the power cord firmly
Press the On/Off button
Clean up suction port
Clean up the cup and the MIF
filter
Clean up dust cup
Machine tilted no more than 30
degrees
Contact after-sale service
Clean the sensor window with
a half-dry cloth
Remove the brushroll and clean
up according to user guide
Contact after-sale service
7