American Standard Aspirations 8888116 Serie Manual Del Propietário página 5

5
INSTALL TUB SPOUT
• While pressing the two BUTTONS (3) on the underside of the tub spout, push WATERFALL TUB
SPOUT (1) over ALIGNMENT PINS (2). With the tub spout pushed firmly against the wall plate, release
the two buttons and ensure that the spout is secure.
• Tighten the two SET SCREWS (5) and install the PLUG BUTTONS (4) on the underside of the spout.
6
TEST INSTALLED FITTING
• Turn on the valve and check the tub spout for leaks
• Press DIVERTER BUTTON (1) to divert water to the
shower head and check for leaks.
Note: To divert water from the shower back to the
tub, the main shower valve must be turned off
7
CARE INSTRUCTIONS
DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL
CLOTH.
DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS,
OR A CLOTH WITH A COARSE SURFACE.
1
3
5
4
1
2
2