Lenco Classic Phono TCD-2570WD Manual De Usuario página 14

ENCODING FROM A BLUETOOTH SOURCE
Plug an USB Disk into the USB socket. While BLUETOOTH playmode is active, press the RECORD BUTTON (9)
one time, "USB" symbol will show on the display, then press the RECORD BUTTON (9) again to start
recording the Bluetooth sound source. The "USB" symbol will flash and record will start after 5 seconds.
Press the PLAY/PAUSE BUTTON (2) one time to pause the recording (the "USB" symbol will stop flashing).
Press the PLAY/PAUSE BUTTON (2) again to resume recording (the "USB" symbol will flash again).
Press the STOP button to stop recording when you want to finish recording.
NOTE: Be sure to turn the volume of your Bluetooth device to maximum. (If the Bluetooth device's
volume level is 0, nothing will be recorded).
DELETE USB
1. During USB mode, press DELETE BUTTON (45) one time/"DEL-1" will show on the display. You can
delete the playing track.
2. Press SKIP UP BUTTON (3). The playing file and "DEL-F" will show on the display. You can delete the
current playing folder.
3. Press SKIP UP BUTTON (3). "DEL-A" will show on the display. You can delete all of the tracks into the
playing USB.
4. Finally press DELETE BUTTON (45) again once confirmed to choose "DEL-1", "DEL-F" or "DEL-A".
MUTE/EQ OPERATION
During playing mode, press the MUTE BUTTON (49) one time, the sound will not be heard from the speakers
and "MUTE ON" will show on the display; press the MUTE BUTTON (49) or rotate the VOLUME KNOB (7) to
cancel mute function and the sound can be heard again from the speakers. During playing mode, press the EQ
BUTTON (34) to choose from different sound effect among FLAT/POP/CLASSIC/ROCK/JAZZ.
SPECIFICATIONS
AC:
FM:
DAB Band:
230 - 240V ~ 50Hz
87.5- 108MHz
BAND III
14