Publicidad
Idiomas disponibles
Idiomas disponibles
4.3. Proceso MIG
3
4
5
6
7
1. Press the process select button (6) choose the MIG mode and the MIG LED will light up.
2. Press the work mode selection button (7) choose 2T, 4T or SPOT
3. Vary the welding current according to the diameter and type of the wire.
4. If the EASY TUNE mode (5) is active, the parameters will adjust automatically when the welding
current varies.
5. If the PRO TUNE mode (4) is active you must adjust each parameter individually.
6. Adjust the wire speed.
1
2
11
14
SWEISSWELD.COM
12
13
8
9
10
Publicidad
