Motorola COMMERCIAL CP140 Guia Basica Del Usuario página 16

Making a Selective Call (CP160/CP180)
You can make a selective call to a particular radio,
known as an individual call, or a group of radios,
known as a group call.
You can make calls by using the Menu, the pre-
programmed Radio Call button or Entering a valid
DTMF digit (0-9) to move to that location in the pre-
programmed list using the DTMF keypad (CP180
only).
Receiving a Selective Call
When you receive a selective call, the LED indicator
flashes yellow (if programmed by your dealer) and
you will hear two high pitched tones.
On CP160 and CP180 radios the display shows
and the pre-programmed name or ID of the calling
radio.
To acknowledge the call, press an release the PTT
button.
Press and hold the PTT button to talk; release to
listen.
English 14
Cancelling a Call
At any time while setting up a call, it may be cancelled
by pressing the Monitor button.
The call timer can also cancel a call.
Ending a Call
A call should always be ended by pressing the
Monitor button.
F