Cisco Systems Linksys WUSB54G Guía De Instalación Rápida página 13

Refresh - Click Refresh to perform
a new search for wireless devices.
Connect - To connect to one of
the networks on the list, select the
wireless network, and click Con-
nect. If the network has wireless
security enabled, a screen requir-
ing security information will
appear.
If the network has WEP encryption
enabled, then you will see the WEP
Key Needed for Connection
screen. Select the appropriate
level of WEP encryption, 64-bit or
128-bit Then enter the network's
Passphrase or WEP Key. To connect
to the network, click Connect. To
WEP Key Needed
cancel the connection, click Can-
cel.
If the network has WPA Personal
security enabled, then you will see
the WPA-Personal Needed for
Connection screen. Select the
appropriate encryption type, TKIP
or AES. Enter the network's Pass-
phrase or pre-shared key in the
Passphrase field. To connect to
the network, click Connect. To
WPA-Personal Needed
cancel the connection, click Can-
cel.
If the network has PSK2 security
enabled, then you will see the
PSK2 Needed for Connection
screen. Enter the network's Pass-
phrase or pre-shared key in the
Passphrase field. To connect to
the network, click Connect. To
cancel the connection, click Can-
cel.
PSK2 Needed
13