Descargar Imprimir esta página

Blue Clean BC2N1HSS Instrucciones De Montaje, Cuidado Y Uso página 13

Lavadora a presión eléctrica
Ocultar thumbs Ver también para BC2N1HSS:

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATING INSTRUCTIONS
OFF
• Push the power button to turn the unit on (Red
power light will turn on). The unit will turn on for 1 - 2
seconds and shut off. This is a normal function of the
auto start feature.
• Squeeze the spray gun trigger to begin pressure
washing.
• Begin power washing by squeezing the trigger on the
spray gun all the way into the handle.
• Release the spray gun trigger to stop the power
washer.
• Allow the motor to come to a complete stop before
squeezing the trigger again.
• Squeezing rapidly will cause the auto start feature to
miss an on/off cycle that may prevent it from turning
on while squeezing trigger after rapid squeezing. Use
slow, deliberate trigger pulls to avoid this.
• Always test a small area to avoid chance of damaging
the surface.
95509_IM_BC 2N1 HSS_ENG-FR-SP(Thankyou letter).indd 13
ON
Adjusting Soap Levels on Foam Cannon
Twist knob to adjust the level of soap as indicated on
the top of the Foam Cannon (O). Twist toward the
higher concentration of bubbles for more soap, or the
opposite direction for less.
• The power washer will pull a ratio of water to
detergent of 10:1 or 10 parts water to 1 part
detergent. The detergent concentration can be
adjusted by turning the detergent knob on the top of
the machine. Turn it left for more concentration or
turn it right for less concentration.
*I
O
13
2020/5/26 下午4:54

Publicidad

loading