Climadiff CVP185A++ Manual De Utilización página 50

3. TECHNICAL CHARACTERISTICS
Below is an example of the nameplate:
The name plate attached to the inside or rear of the appliance (depending on the model)
includes all the information specific to your wine cellar.
We recommend that you make a note of its serial number in this booklet prior to installation,
so that you can refer to it later (technical work, request for assistance, etc.)
Once it is installed and loaded, access to it is not so easy.
CAUTION: No assistance can be provided without this information.
4. INSTALLATION INSTRUCTIONS
Before using your wine cellar
•
Remove the inner and outer packaging. Remove your wine cellar from the transport pallet
by unscrewing the two screws on the frame at the back of the device.
•
Before connecting the cellar to the electrical socket, leave it in position for 24 hours. This
will reduce the possibility of malfunction of the refrigeration circuit due to transport.
•
Clean the inside using a soft cloth and lukewarm water.
50