ADE CK 2301 Instrucciones De Operación página 45

With daylight saving time enabled,
Saving Time) is displayed.
Battery change indicator
When the battery symbol
you need to change the batteries.
− Follow the procedure described in the section
"Start-up".
Resetting the radio-controlled alarm
clock to factory setting
Reset the radio-controlled alarm clock to its factory
setting if the display shows unusual or obviously
incorrect values.
1. Remove the batteries from the battery
compartment and wait a while.
2. Reinsert the batteries. Observe the correct
polarity (+/-).
3. Proceed as described in the chapter "Receiving
the time signal".
Cleaning
− If necessary, dust the item with a soft, dry cloth
or wipe it with a slightly moistened cloth.
CK 2301 DCF radio-controlled clock
(Daylight
appears on the display,
45