Bosch GWS Professional 18V-15 C Manual Original página 39

Status indicators
Battery charge indicator Meaning/cause
(user interface) (37)
Green Battery charged
Yellow Battery almost empty
Red Battery empty
Power tool status Meaning/cause
indicator (42)
Green Status OK
Yellow Critical temperature has been reached or re-
chargeable battery is almost empty
Illuminated red Power tool has overheated or battery is empty Allow the power tool to cool down, or replace
Flashing red Kickback shutdown, restart protection or im-
pact shutdown has been triggered
Flashing blue (GWS 18V-15 C / GWS 18V-15 SC /
GWS 18V-15 PSC)
Power tool is connected to a mobile device or
settings are being transferred
A) Bluetooth ® Low Energy Module GCY 42 not included with the product as standard
Temperature indicator (43) Meaning/cause
Yellow Critical temperature has been reached (mo-
tor, electronics, battery)
Red Power tool is overheated and will switch off
Smartphone symbol (41) Meaning/cause
– (GWS 18V-15 C / GWS 18V-15 SC / GWS 18V-15 PSC)
Further information can be found under the "Power tool status" display on a mobile device if it
is connected via Bluetooth® wireless technology.
A) Bluetooth ® Low Energy Module GCY 42 not included with the product as standard
Connectivity functions
(GWS 18V-15 C / GWS 18V-15 SC / GWS 18V-15 PSC)
In conjunction with the Bluetooth® Low Energy
module GCY 42 (not included with the product as stand-
ard), the following connectivity functions are available for
the power tool:
– Registration and personalisation
– Status check, output of warning messages
– General information and settings
– Management
Read the corresponding operating instructions for informa-
tion about the Bluetooth® Low Energy Module GCY 42 (not
included with the product as standard).
The connection of the power tool with the app must be con-
firmed by pressing the speed preselection button (39) on
the user interface (4). The app requests this when connect-
ing.
Bosch Power Tools
Solution
–
Replace or charge battery soon
Replace or charge battery
Solution
–
Run the power tool at no load and allow it to
cool down, or replace or charge the battery
soon
or charge the battery
Switch the power tool off and on again
–
A)
:
Solution
Run the power tool at no load and allow it to
cool down
Leave the power tool to cool down
Maintenance and Service
Maintenance and Cleaning
Remove the battery from the power tool before carry-
u
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
To ensure safe and efficient operation, always keep
u
the power tool and the ventilation slots clean.
Store and handle the accessories carefully.
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
English | 39
A)
:
1 609 92A 8XH | (21.11.2023)