L.B.White Tradesman CP400 Manual Del Usuario página 13

Handle Assembly
Assemble handle to four holes at barrel top as shown in
Fig. 1. Tighten screws securely.
FIG. 1
Hose and Regulator
Assembly
-- Use pipe thread compound at areas as shown and
ensure all connections are tightened securely.
TRADESMAN 170 Propane Gas
(See Fig. 2 and 3)
FIG. 2
THREAD SWIVEL NUT
END OF HOSE TO
HOSE THREADS ON
ADAPTER
THREAD HOSE ADAPTER TO
INLET OF GAS CONTROL VALVE
FIG. 3
APPLY COMPOUND AND THREAD RIGID HOSE
END INTO REGULATOR OUTLET.
Tradesman Construction Heaters
APPLY COMPOUND
AT 3/8 INCH THREADS
OF HOSE ADAPTER
Owner's Manual • Tradesman
-- Apply pipe thread compound at all threaded
connections.
-- Observe gas flow direction of regulator.
TRADESMAN 170 NATURAL GAS
-- Apply pipe thread compound at threaded connections
and connect the components together. See Fig. 4 and
tighten securely.
FIG. 4
TRADESMAN 400 LP (See Fig. 5 and 6)
FIG. 5
APPLY COMPOUND AND THREAD RIGID
HOSE END INTO GAS INLET AT HEATER
FIG. 6
APPLY COMPOUND AT 1/4 INCH
THREADS OF HOSE ADAPTER AND
THREAD INTO REGULATOR OUTLETS
THREAD SWIVEL NUT
END OF HOSE TO HOSE
THREADS ON ADAPTER
13