Remington PROluxe AC9140 Manual Del Usuario página 5

ENGLISH
• Do not leave the appliance unattended while plugged in.
• Do not place the appliance on any soft furnishings.
• Do not use attachments other than those we supply.
• Do not set the appliance down while still on.
• Do not twist or kink the cable, or wrap it round the appliance.
• Do not use the appliance if it is damaged or malfunctions.
• Check the cord regularly for any sign damage.
• This appliance is not intended for commercial or salon use.
PARTS
1. Grille
2. Heat selector switch (N, O, P)
3. Speed selector switch (0, F , E)
4. Cool shot
5. Style shot
6. Slim 7mm concentrator
INSTRUCTIONS FOR USE
• Wash and condition your hair as normal.
• Squeeze out excess moisture with a towel and comb through.
• Hairsprays contain flammable material – do not use while using this product.
• Fit accessory attachments to the front of the hairdryer then twist clockwise to lock in
place. Take care when you do this because the attachments can become hot during
use.
1. Plug the product into the mains power supply.
2. Switch your hairdryer on and select the desired speed setting (low F or high E) using
the speed selector switch.
3. Select the desired heat setting (low N, medium O or high P) using the heat selector
switch.
4. After use, turn the appliance off and unplug it.
5. Let the appliance cool down before cleaning or storing away.
How to create longer-lasting styles with Style Shot (
• Style shot works on all temperature and speed settings. It increases the air
temperature and ensures that the optimum heat is used when styling.
• For best results, dry your hair as normal without using the style shot setting until it is
about 70-80% dry. Then, turn off your dryer and section your hair.
• Fit the styling concentrator attachment. You can also use the 7 mm concentrator
attachment. Take care when you do this because the attachments can become hot
during use.
• Select the style shot setting (
4
7. Styling concentrator attachment
8. Diffuser attachment
9. Removable easy clean rear grille
10. Hang up loop
11. Cord
) and turn your dryer on.
)