switel BCC2020 Manual Del Usuario página 12

Setting Up
2. Plug the charger for the Parent Unit into the mains power socket.
1
3
Warning: Use only the mains power adapter supplied. Using an incorrect
3. Slot the Parent Unit into the charger, the charger light will stay red,
even when batteries are fully charged.
Note1:
charge the Parent Unit for at least 8 hours before your first using the baby monitor.
2:
battery insertion or replacement is necessary if an unlit charger light.
3:
charging or battery replacement is necessary if the following occurs:
The power indicator LED does not light.
Battery low: The power indicator LED blinks.
4:
the Parent Unit can still be used when it is in the charger.
5:
Please power off the Parent Unit before removing the batteries.
0
adapter may permanently damage the charger.
2
OK
4
the charger light will stay red