Publicidad
Idiomas disponibles
Idiomas disponibles
PLAY
0-9,+10
8
1
In the programmed edit recording function the tracks can be
programmed while checking the remaining time on each side of
the tape as the tracks are programmed.
mm?if
The programmed edit recording will not start from a point halfway
in the tape, The tape must be recorded on from the beginning of
either side.
1
2
3
4
Insert
the tape into
deck 2.
Insert the tape with the side to be recorded on first facing out
from the unit.
Press CD and load the disc(s).
Press EDIT/CHECK
twice on the remote control.
"EDIT" and "PRGM" are displayed,
* When "Al" is displayed, press EDIT/CHECK again.
Press
numbered
buttons
on the remote
control
to designate
the tape length.
10 to 99 minutes can be specified.
The <,
-
or MULTI JOG are also available to designate
the tape length.
Tape length
Tape side A (front side)
5
Press DISC DIRECT
Maximum recording
time for side A
PLAY 1-3 to select a disc.
Then, press numbered
buttons O-9 and + 10 on
the remote control to program a track.
Example: To select the 10th track of disc 2, press DISC
DIRECT PLAY 2, then press +10 and O.
6
7
8
9
Repeat step 5 for the rest of the tracks for side
a.
A.
A track whose playing time is longer than the remaining time
g;"
cannot be programmed.
,,,
:!l~:
Press
EDIT/CHECK
on the remote
control
to
$#
select side B and program the tracks for side EL
After confirming Bon the display, repeat step 5.
Tape side B, (reverse side)
Press
EDIT/CHECK
to select side A and press
REC/REC MUTE to start recording.
CD play and recording of edited tracks for the first side start
simultaneously. When the last track programmed for side A
is finished, deck 2 enters the recording stop mode. After
entering the recording stop mode, go to step 9.
Press EDIT/CHECK
on the remote
control
fc~r
recording of the second side.
"B" is displayed.
10
Turn over the tape in deck 2 and press
REC/
REC MUTE to start recording.
Recording starts.
To stop recording
Press
. Recording and CD play stop simultaneously.
To check the order of the programmed
track numbers
Before recording, press EDIT/CHECK on the remote control 10
select side A or B, and press -
or -
repeatedly.
m
Disc number
Tape side
Program number
Track number
Programmed track
numbers
To change the program of each side
Press EDIT/CHECK on the remote control to select side A or 13,
and press
CLEAR to clear the program on the selected side,
Then program tracks again.
To clear the edit program
Press
CLEAR twice so that "EDl~ disappears on the display.
m
Up to 30 tracks can be programmed from any of the inserted
discs.
ENGLISH
116
Publicidad
