Chal-tec Street Car Seat 1.0 Manual Del Usuario página 35

INSTALLATION GROUP 2 + 3 (15-36 KG)
1. Taking out the harness
If the weight of the child seat is over 15 kg, you can remove the 5-point
harness system and the baby cushion.
Press the belt ad-
juster down and pull
both shoulder straps
forward to release the
belt.
Pull the two side shoul-
der straps out of the
buckle.
After removing the child seat
belt from the metal bracket on
both sides, pull the child seat
belt out from the front of the
child seat. Then remove all the
child seat belts from the child
seat and the belt pads. At the
same time, remove the belt with
the buckle from the guide.
Pull the two side shoul-
der belts out of the two
side belt slots of the seat
base.
Pull the shoulder straps
out of the belt slot and
remove the shoulder
pad.
Pull the belt buckle out
of the front slot of the
seat base.
EN
35