Canon PIXMA G2410 Serie Guía De Inicio página 5

7
Replace the tank cap securely.
8
Close the ink tank cover.
9
Repeat steps 2 to 8 to pour all ink into the
corresponding ink tanks on the right according to
the label.
Confirm that the ink has been filled to the upper
limit line )A(.
10
LIFT UP the scanning unit / cover, and then close
it.
a
b
6. Preparing the Ink System
1
Press the Black button and confirm that
icon( disappears.
Ink preparation takes about 5 to 6 minutes.
Proceed to the next page.
If any of the following screens
appear
The cartridges are not installed correctly.
"3. Installing the Cartridge" on page 1
)A(
No cartridges are installed.
"3. Installing the Cartridge" on page 1
The protective materials are not removed.
"2. Removing Packing Materials" on page 1
Ink is not prepared normally.
Press the ON button to restart the printer, and
then see "5. Pouring Ink" on page 2.
Waiting to prepare ink.
"6. Preparing the Ink System"
If you have not poured ink into the ink tank yet,
see "5. Pouring Ink" on page 2.
For all other cases, refer to the Online Manual.
Turns off
Ink icon
Number or letters
)Ink
3