ARDES AR437B Instrucciones Para El Uso página 17

1 - Pull cord switch
2 - Power indicator
3 - Main body
4 - Fixing plate
5 - Protective flap
6 - Hanging holes
Technical data indicated on the appliance.
ASSEMBLY INSTRUCTIONS
Assembly kit composed of: 4 screws - 4 wall plugs.
WALL INSTALLATION
Fix the four plugs to the wall taking into consideration that the distance
between them must correspond to that between the four hanging holes
on the back of the appliance. Tilt the main body down and unscrew the
screw placed on the top of protective flap; tilt the main body up and
unscrew the screw placed on the bottom of the protective flap. Position
the main body in straight position (not tilted neither up nor down) and take
out the protective flap from the fixing plate. Place the product to the wall
taking care that the hanging holes correspond with the holes in the wall
and fix the product using the screws provided. Replace the protective flap
and secure it with the two screws previously removed.
The appliance must be installed at least 1,80m above the ground
and 15 cm from the ceiling.
Operation.
Before connecting or disconnetting the appliance, make sure that the
product is in off position (power indicator show "0").
To turn the appliance on put the plug in the socket and select the desired
power by pull the cord switch: power 1 (600W) and power 2 (1200W).
The selected power is shown in the power indicator window.
To turn the product off the power indicator must be in "0" position.
Technical informations
Instructions for use
GB
GB
17