Publicidad
Idiomas disponibles
Idiomas disponibles
Using Your Humidifier
(cont'd.)
Speed
Button
This humidifier is equipped with a 4-speed fan
control. Each push of the speed button advances
the
mode
through
the
settings
of
HIGH,
MEDIUM,
LOW,
WHISPER,
and
AUTO.
The selected setting is displayed on the digital
readout. The higher the setting, the faster water is
evaporated and released into the air. WHISPER
is the quietest setting and is provided for conditions
that do not require a rapid evaporation rate.
How Auto
Control
Works
Quiet Comfort
Fan Speed Display
Fan Speed Button
The AUTO
setting allows the humidifier to manage
it's speed range to maintain your desired humidity
setting. It wilt automatically
cycle to the most
efficient speed to achieve the desired humidity.
Here is how the fan wilt operate:
• HIGH speed if room humidity is 15% or greater
RH (Relative Humidity) below the SET point.
• MEDIUM
speed if room humidity is
15 - 10% RH below the SET point.
• LOW
speed if room humidity is 10 - 5% RH
below the SET point.
• WHISPER
speed if room humidity is 5% RH
or less.
If the room humidity is not increasing at the current
fan speed during a 15 minute period, the fan speed
increases to the next higher speed until the humidity
SET point is reached.
NOTE:
The humidifier may run on HIGH for an
extended period of time if the actual room humidity
is extremely low.
Humidity
Control
This button allows you to adjust the humidity to
suit your needs. This humidifier will automatically
cycle on and off as required to maintain the
selected setting. The readout displays both actual
(ROOM) and desired (SET) humidity percentage
(%) settings when humidity control button is
pressed. The ROOM readout has a range of 25%
to 95%. If the room humidity level is equal to or
less than 20% the display will show a flashing 20.
The SET readout has a range of 25% to 65% and
is adjusted in increments of 5%. Initially
depressing the humidity button will display the
current humidity setting. Each additional press of
the button increases the setting by 5%. A SET
point of 65% operates the humidifier continuously
regardless of the ROOM reading. The humidistat
that senses the readings is located on the power
cord. Insure that this humidistat is free from
obstruction.
®
Quiet
Comfort
Humidity Display
Humidity Control Button
8
Publicidad
