Moulinex Turbo Cuisine CE754810 Manual Del Usuario página 125

Problem
Steam leakage from lid.
Food is uncooked
E0 displayed on the digital
screen.
E1 displayed on the digital
screen.
E2 displayed on the digital
screen.
242
Possible reasons
The sealing gasket is not properly
installed.
The sealing gasket is dirty.
The sealing gasket is damaged,
or the edge of the cooking pot is
damaged.
Solid/liquid ingredients ratio is
incorrect.
No electricity from the power
supply.
Pressure switch is faulty.
The temperature sensor is faulty.
The lid is not properly positioned
for your cooking program. Each
program requires a specific lid
position.
Solutions
Remove the sealing gasket, clean
it and reinstall it in the correct
position.
Remove the sealing gasket, clean
it and reinstall it in the correct
position.
Send the appliance to an Approved
Service Centre for repair.
Try again by following precisely the
quantities of the recipe.
Check your home electric circuit.
Send the appliance to an Approved
Service Centre for repair.
Send the appliance to an Approved
Service Centre for repair.
Check and adjust the lid position
required by your cooking program,
refer to the cooking programs
table in part 6 of this manual.
Restart your program once the lid
is correctly positioned. If the issue
remains, send the appliance to an
Approved Service Center for repair.