Publicidad
Idiomas disponibles
Idiomas disponibles
CD
For details on selecting a CD/MD changer, see
page 13.
Display items
Example: when you set Info (information) mode
to "All" (page 12).
A Source (CD/ATRAC/WMA/MP3/AAC)
indication
B Clock
C Track/album/group number, Disc/artist/
album/group/track name, Elapsed playing
time, Text information
To change display items C, press (DSPL);
scroll display items C, press (SCRL) or set
"Auto Scroll on" (page 12).
Tip
Displayed items will differ, depending on the disc type,
recorded format and settings. For details on MP3/
WMA/AAC, see page 16; ATRAC CD, see page 16.
Repeat and shuffle play
1
During playback, press (1) (REP) or
(2) (SHUF) repeatedly until the
desired setting appears.
Select
Repeat Track
Repeat Album*
1
Repeat Group*
2
Shuffle Album*
1
Shuffle Group*
2
Shuffle Disc
*1 When an MP3/WMA/AAC is played.
*2 When an ATRAC CD is played.
To return to normal play mode, select "Repeat
off" or "Shuffle off."
8
To play
track repeatedly.
album repeatedly.
group repeatedly.
album in random order.
group in random order.
disc in random order.
Radio
Storing and receiving stations
Caution
When tuning in stations while driving, use Best
Tuning Memory (BTM) to prevent an accident.
Storing automatically — BTM
1
Press (SOURCE) repeatedly until
"TUNER" appears.
To change the band, press (MODE)
repeatedly. You can select from FM1, FM2,
FM3, AM1 or AM2.
2
Press (MENU).
3
Rotate the volume control dial until
"BTM" appears, then press (ENTER).
The unit stores stations in order of frequency
on the number buttons.
A beep sounds when the setting is stored.
With the card remote commander
In steps 3: press M or m instead of the volume control
dial.
Storing manually
1
While receiving the station that you
want to store, press and hold a
number button ((1) to (6)) until
"MEM" appears.
The number button indication appears in the
display.
Note
If you try to store another station on the same number
button, the previously stored station will be replaced.
Receiving the stored stations
1
Select the band, then press a number
button ((1) to (6)).
Tuning automatically
1
Select the band, then press (SEEK) +/–
control up or down to search for the
station.
Scanning stops when the unit receives a
station. Repeat this procedure until the
desired station is received.
Tip
If you know the frequency of the station you want to
listen to, press and hold (SEEK) +/– control to quickly
locate the approximate frequency, then press (SEEK)
+/– control up or down repeatedly to fine adjust to the
desired frequency (manual tuning).
Publicidad
