Publicidad
Idiomas disponibles
Idiomas disponibles
Clamp
lever
Axis
lock
4
/
" abrasive
1
2
disc included
Outer
flange
Inner
flange
Auxiliary handle
assembling orifice
Clamp
lever
Protection Guard Assembly
• Match both cantilevered parts inside the protection guard with the corresponding
slots in the axis cover.
• Turn 180° into the opposite position.
• Fix pushing the clamp lever.
Protective
guard
Disc Assembly
1. Fit the inner flange onto the axis.
2. Set the disc onto the inner flange.
3. Set the outer flange onto the axis.
• Press the axis lock into the grinder head.
4. Screw the outer flange with the lock nut wrench until securely fastened.
DANGER
The axis lock should only be used to change discs.
Never use the axis lock to stop the disc while rotating.
6
ENGLISH
Auxiliary
handle
Assembly
Slot
Parts
Protective
guard
Handle
Switch
4
/
" abrasive
1
2
disc included
Switch
Protective
guard
5/8-11
UNC-1A
Lock nut wrench
(Included)
Axis
lock
Protective
Vent
slots
Power cord
protector
supply cable
Lock nut
wrench
3
2
Disc
Inner
flange
Grinder
head
guard
Power
4
Outer
flange
1
Publicidad
