CLEANING AND MAINTENANCE
Turn the oven off and remove the power plug from the mains socket before
cleaning.
Risk of electric shock !
Penetrating moisture may cause an electric shock. Do not use any
high-pressure cleaners or steam cleaners.
Risk of burns !
Never clean the appliance immediately after switching off. Let the appliance
cool down.
To ensure that the different surfaces are not damaged by using the wrong
cleaning agent, observe the information in the table. Do not use
sharp or abrasive cleaning agents,
metal or glass scrapers to clean the glass in the oven door,
metal or glass scrapers to clean the door seal,
hard scouring pads and sponges,
cleaning agents with high concentrations of alcohol.
Wash new sponge cloths thoroughly before use.
Allow all surfaces to dry thoroughly before using the appliance again.
Area
Stainless steel
front
Cleaning
Hot soapy water :
Clean with a dish cloth and then dry with a soft
cloth. Remove flecks of limescale, grease, starch
and albumin (e.g. egg white) immediately.
Corrosion can form under such flecks. Do not use
glass cleaners or metal or glass scrapers for
EN-25