Publicidad
Idiomas disponibles
Idiomas disponibles
22
Operating
Dubbing USB to USB
You can do dubbing a various sound source in
USB1 to USB2 on USB function.
1. Connect a USB device including desired sound
files to USB1.
2. Connect another USB device to USB2.
USB REC on the unit or USB REC on
3. Press
the remote control.
4. To stop recording, press I on the unit or
Z ENTER on the remote control.
Pausing recording
During recording, press
3
unit or USB REC on the remote control to pause
recording. Press it again to restart recording.
(TUNER/AUX/PORTABLE only)
USB REC on the
,
Note
y You can check the recording percentage
rate for the USB record on the display
window during the recording. (MP3/WMA,
CD Only)
y During recording MP3/WMA, there is no
sound.
y When you stop recording during playback,
the file that has been recorded at that time
will be stored. (Except MP3/WMA files)
y Do not remove the USB device or turn
off the unit during USB recording. If not,
an incomplete file may be made and not
deleted on PC.
y If USB recording does not work, the
message like "NO USB", "ERROR", "USB FULL"
or "NO REC" is displayed on the display
window.
y Multi card reader device or External HDD
can not be used for USB recording.
y A file is recorded by about 512 Mbyte when
you record for a long term.
y You may not store more than 999 files.
y It'll be stored as follows.
AUDIO CD
MP3/WMA
* : TUNER, AUX and the like.
The making of unauthorized copies of copy-
protected material, including computer
programs, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offense.
This equipment should not be used for such
purposes.
Be responsible
Respect copyrights
The other
source*
Publicidad
