KitchenAid KSB465 Instrucciones página 10

Using the Blender
PULSE MODE Feature
Your KitchenAid_ Blender offers Pulse Mode,
which allows a "Pulse-at-any-Speed" feature.
NOTE: PULSEMODE will not work with
the CHOP ICEfeature.
1. Before operating the Blender, make
sure the pitcher is properly in place on
the Blender base.
2. Put ingredients into pitcher, and firmly
attach lid.
3. PressPULSEMODE. The indicator
light above the button will blink to
indicate that all four speeds are in the
PULSEMODE.
iiiili
4.
Select a speed button. Pressand hold
for the desired length of time. Both
the speed button and PULSEMODE
indicators will stay lit when pulsing
at the selected speed. When button
is released, the blending will stop,
but the Blender will remain in PULSE
MODE and the PULSEMODE indicator
will return to blinking. To pulse again,
simply press and hold the button of the
desired speed.
5. To turn off the PULSEMODE feature,
press OFE The Blender is now ready for
normal operation.
6. Before removing the pitcher, press OFF
to deactivate the Blender, and unplug
the power cord.
Ingredient Cup
The 2 oz. (60 ml) ingredient cup can be
used to measure and add ingredients.
Remove cup and add ingredients at STIRor
MIX speeds. When operating
at higher speeds, with a full
pitcher or with hot contents
stop the Blender and then
add ingredients.
Soft Start TMBlending Feature
The Soft Start TMblending feature
automatically starts the Blender at a lower
speed to draw ingredients into the blades,
then quickly increases to the selected
speed for optimal performance.
NOTE: The Soft StartTMblending feature
only works when a speed is selected from
the "Off" mode. The Soft StartTMfeature
does not engage with PULSEMODE or
CHOP ICE.