Publicidad
Idiomas disponibles
Idiomas disponibles
Trouble shooting
Before calling the customer services, please check that the appliance is
correctly connected, any of the following cases are not covered by the
guarantee
> Damage caused by improper use, storage or maintenance.
> Damage caused by unauthorized disassembly and repair.
> Damage caused by misuse.
> Using the ceramic hob for commercial purposes.
If an abnormality comes up, the ceramic hob will enter the protective state
automatically and display corresponding protective codes:
Error
Message
ER03
Water or pot on the glass over
the control
The thermocouple was loose
E
or broken
ER21
The temperature inside this
device was too high
The above are the judgment and inspection of common failures.
Please do not disassemble the unit by yourself to avoid any dangers and damages to
the ceramic hob and please contact the supplier.
Technical Specification
Cooking Hob
Cooking Zones
Supply Voltage
Installed Electric Power
Product Size: L×W×H(mm)
Building-in Dimensions A×B (mm)
Weight and Dimensions are approximate. Because we continually strive to improve our
products we may change specifications and designs without prior notice.
Possible Cause
EN-14
What to do
Clean the user interface
Please contact the supplier
to reconnect the
thermocouple.
The device must be stopped
and cooling.
KDV3Z5400
3 Zones
220-240V~
5400W(230V)
590X520X52
560X490
Publicidad
