Publicidad
Idiomas disponibles
Idiomas disponibles
Vertical view
a
Note: the water tank of this product can only be
filled with cold water. Please avoid injecting hot
water into the water tank .At the same time, do
not add perfume, vinegar, starch or other che-
micals in the cold water to avoid damaging the
product.
Adjust the height of the telescopic pole
Loose the adjusting buckle of the telescopic pole, vstretch and
adjust the four telescopic poles to an appropriate height, and
then lock the adjusting buckle of the telescopic pole.
Install the hook and place household hangers
Insert the connector at the lower end of the hook at the top of the
telescopic rod, and hold the extension rod to press the hook into
position. Place the household coat hanger in its place. The rack
can be rotated 360°.
Nozzle placed
Place nozzle in nozzle hook.
Note: Do not hang the steam hose on the hook to prevent the
steam nozzle from falling.
Falling can hurt people or damage steam sprinklers.
Installation and removal of trouser seam clips
Installation: Let the groove of the pants seam clip on one corner
close to the nozzle bottom protruding installation piece, and
then follow this angle gently upward.
Remove: first tilt the seam clamp, then gently pull down the
seam clamp to remove it.
Water tank filling
Remove the water tank from the main engine, unscrew the nut
at the bottom of the water tank and fill it with water, cover the
nut and tighten it, place the water tank in its original position
and ensure no deviation.
Tips: for a better ironing experience and protec-
tion of your clothes, you are advised to use pure
water or distilled water.
E NGLI SH
9
Publicidad
