Descargar Imprimir esta página

Cub Cadet Power Lok CCT410 Manual De Instrucciones página 19

Publicidad

Idiomas disponibles

Idiomas disponibles

Sweeping
Use the trimmer for sweeping cut grass
and debris from walkways and
driveways. Position the line parallel to
and above the surface to be swept (Fig.
11). Swing the trimmer from side to side
in a fanning motion. The air flow from
the rotating line will blow the grass and
debris from the surface being swept.
NOTE: Be careful not to allow the bump
head to contact the ground, as this
could result in damage to the bump
head and/or releasing more trimmer line
from the spool.
Edging
Use the trimmer for edging around
walkways and flower beds.
WARNING:
pants, long sleeve shirt, gloves and
safety goggles and a face shield when
edging. Debris being thrown from the
trimmer at high speed can injure your
eyes and any exposed skin.
Hold the trimmer in a similar manner to
trimming, but with the trimmer head
rotated away from your body by 90°
(Fig. 12).
ADVANCING THE POLYMER LINE
As the trimmer is used, the polymer line
will wear down or the tips will break off.
To advance the polymer line and expose
a greater length, simply tap the bump
head on the ground while the trimmer is
turned ON.
ASSEMBLY AND OPERATING
Always use long
Sweeping
19
Fig. 11
Fig. 12

Publicidad

loading